|
| CLX250 |
|
Portable Electronic Xenone Light Source For Endoscopies |
 |
- 250 Watts High Power Xenon Lamp.
- Perfect Optical Collimator for maximum light.
- Intensity can be varied as per the requirement through Electronic Control.
- Ideally suited for all Endoscopic procedures including Laparoscopy.
- In-built Filter.
- Bright Light for Video applications.
- Easy Lamp replacement.
- Low-cost replacement lamps.
- Compact & Light Weight.
- Hour Meter provided to monitor the Lamp Life
- Storz type Light Cable Adaptor.
| Electrical |
|
| Supply Voltage |
230 V ±10% AC @ 50-60 Hz |
| Power |
470 Watts (max) |
| Fuse |
5A X 2 nos., 5X20mm, Fast Blow |
| Power entry |
Panel mounting IEC C14 inlet for three wire
detachable cable. |
| Keys provided on the panel |
MODE : HIGH/LOW (toggles light output in between HIGH & LOW), LAMP ON/OFF, INTENSITY INCREASE/DECREASE |
| Optical |
|
| Colour Temperature |
5600º K |
| Illumination |
7,500lm |
| Lamp type |
Xenon Photo Optic, X10-252 |
| Illumination Control |
Electronic. Illumination can be increased or decreased by pressing the keys |
| Light Delivery |
Through Optical Collimator Assembly |
| Cable connector |
Compatible with Storz Fibre Optic Cable |
| Expected Lamp Life |
> 500 working hours |
| General |
|
| Dimensions |
39.5 X 35 X 13.5cm |
| Weight |
11kg |
| Operating temperature |
15º - 35º C |
| Degree of protection |
IP20 |
| Hour Meter |
Provided on the back to monitor the lamp life with a max count of '9999' |
- Because of the continuous development programme the specifications may change without prior notice.
- The accessories shown in the picture are not a part of the standard system.
- Current and continuous development may make this publication / site lag actual equipment and accessory shipments. Consult your local distributor.
|
|