digiFLOW-ST2
The digiFLOW-ST2 is a compact and Hi-Tech digital Uroflowmetry system designed for
practical, everyday flow studies. The device works with any standard PC. The investigation starts automatically when the patient starts voiding. The flow and volume scales can be adjusted.Patients' data is stored on a hard disk along with the test results and can be retrieved any time for inspection or printing out.
Advanced PC Based Uroflowmetry System |
|
The printer provides you with a simple, crisp and clear printout with Uroflowmetry results and patient information. It also prints the clinic / hospital name on top of the sheet. Graphical flow rate charts are supported by alphanumeric data.
Fully Automatic.
User Friendly completely stand-alone system..
Prints crisp and clear report on a thermal paper.
Multiple tests can be conducted successively without emptying the jar every time.
|
For digiFLOW ST2 Sensor |
Auto / Manual Start & Auto Stop
Maintenance free.
Printout contains Graph and tabular text data.
Flow Measurement Range : 0~50 ml/sec.
Volume Measurement Range : 0~750 ml.
Removes artefacts automatically.
Reusable urine container and funnel.
High precision sensor for flow and volume.
Micturition chair (optional).
Upgradation to Urodynamics possible.
digiFLOW ST2 is a Fully Digital Stand-alone UROFLOMETRY system. The most striking features of digiFLOW ST2 are its effectiveness, simplicity and accuracy.
The AUTO mode if selected, the system waits till initial voiding to start the recording. As soon as a patient voids, the system starts recording from the first drop.
The inbuilt memory retains the data of the last recorded test.
In-built Hi-Tec calibration system. The sensor can be calibrated easily within no time to get accurate results.
|
For digiFLOW ST2 Report |
You can have as much print outs (copies) as you wish.
The system has an Elegant, easy to understand Key Board for selecting all functions.
The system uses High Accuracy Weight Transducer, which requires no maintenance.
There is no need to empty the jar after each test is conducted. The Jar Full Indicator glows and indicates if the jar is full. This feature gives a comfort to the operator particularly during the camps.
n-built compact High Quality High Resolution Thermal Printer makes it easy to have crisp and clear quick printouts.
The printer needs No Maintenance, No Ink Refilling, No Expensive Cartridge Replacement
The system uses High Accuracy Weight Transducer, which requires no maintenance.
There is no need to empty the jar after each test is conducted. The Jar Full Indicator glows and indicates if the jar is full. This feature gives a comfort to the operator particularly during the camps.
In-built compact High Quality High Resolution Thermal Printer makes it easy to have crisp and clear quick printouts.
The printer needs No Maintenance, No Ink Refilling, No Expensive Cartridge Replacement
|
| Control Unit | Based on Ultra High Speed Micro Processor
|
| Supply Voltage: |
230 V ±10% AC @ 50-60 Hz |
| Power: |
20 Watts (max). |
| Power entry: |
Panel mounting IEC C14 inlet for three wire detachable cable. |
| Fuse: |
750mA, 5X20mm, Fast Blow |
| Degree of protection: |
IP20 |
| Dimensions: |
265W X 112H X 235D mm |
| Weight: |
2.8 Kg |
| Memory type: |
Volatile |
| Memory capacity: |
One test (Last conducted test till the unit is powered) |
| Flow Range: |
0~50ml/sec. |
| Volume Range: |
0~750ml |
| Test duration: |
120sec. |
| LED Indications: |
Auto/Start, Voiding, Urine present, Jar full, Printing. |
| Jar capacity : |
2000ml, Use only supplied plastic jar. |
| Key Board: |
Feather touch, sealed . |
| Cabinet shoes: |
Retractable for better viewing. |
| Sensor cable length: |
4.5mtr. |
| Sensor Unit | |
| Dimensions: |
200W X 100H X 200D mm. |
| Weight: |
2.8Kg. |
| Sensor type: |
Load cell. |
| Printer | |
| Printing method: |
Direct Thermal Printing. |
| Resolution: |
203 DPI. |
| Paper Loading: |
Easy Clam Shell type. |
| Sensor: |
Paper out detection and indication. |
| Cutter: |
Manual. |
| Paper : |
digiFLOW ST2 Premium printer paper. |
| Report | |
| Printing time (one copy): |
30 seconds (approx.). |
| Graphical data: |
Flow in ml/sec., Volume in ml. |
| Tabular data: |
Volume Voided, Peak flow, Voiding time, Flow time, Delay, Time to peak, Intervals and Average flow rate. |
| Number of copies: |
Single or multiple (as many as needed before starting the next test or switching off the system). |
| Customised letterhead : |
Optional. |