Lithosplit-4 Classic
Intra Corporeal Pneumaitc Lithotripsy System

Salient Features

• No thermal injury to tissue.
• Runs on any of the sources, Oxygen Cylinder, Central Oxygen Supply or Compressed Air.
• Easy to assemble and operate.
• Frequencies of Impacts.
• Power adjustment.
• Light-weight LITHOSPLIT Super Hand Piece.
• Hand Piece parts having finish better than 10RA.
• Long Lasting Probes.
• Demonstration Video CD covering Live URS, PCNL and Bladder Stone procedures.
• Ultra High Speed Microprocessor.
• Unique Foot Switch Fault Detection system.
• Full Digital System.
• Extra Power for superfast disintegration.
• Feather Touch Keys.
• Fuzzy Logic for Improved Energy Control.
• Portable, Light Weight system.
• Free Carrying Case.

Carry Case is Supplied As A Standard Accessory

Technical Specifications

Supply Voltage	230V AC @50/60Hz (110V optional)
Power	25 Watts max.
Frequencies of Impacts	Four choices, Single / Multiple
Input Pressure	3.5 bar
Output Pressure max	5 bar
Pressure Regulator	Continuously Variable from 0 to 4 bar
Input Gas	Oxygen, Air
Dimensions	280 W X 90 H X 240 D mm
Weight	3.5 kg.
Carrying Case	Provided Free of Cost

Lithosplit Super Hand Piece

Input Pressure	Controlled by the Control Unit
Dimensions	220 L X 26 Dia. mm (w/o Probe)
Weight	140 gms (w/o Probe)

Standard Configuration

Lithosplit-4 Control Unit	1 no
LITHOSPLIT Super Hand Piece with tube and Probe Cover for 2.0 mm Probe	1 set
Probe Cover for 1.0 mm Probe	1 no.
Sterilisation Cover	1 no.
Probe 1.0 mm	1 no.
Probe 2.0 mm	1 no.
Foot Switch with cable and connector *	1 no.
Regulator for Oxygen Cylinder with tube	1 no.
Spanner for fitting a Regulator on a cylinder	1 no.
Key for operating a Cylinder	1 no.
Spare “O” Ring	2 no.
Spare Silicone Spring	2 no.
Operations Manual with Demo Video CD	1 no.
Case to store and carry the system	1 no.

*A Pneumatic Foot Switch is supplied only with LITHOSPLIT 4.1 DIGITAL.

Do we need the accessories? The standard configuration is sufficient to start. Two Probes are included in the standard configuration. Bridge for bladder stones, Adapter for Ureteroscope and Suction Assembly for PCNL are optional.

The packing details for Lithospilt 4.1 classic:

• Type of packing: Corrugated Paper carton
• Dimensions : 71X53X26 cms.
• Gross weight:11.5kg
• Net weight.:10kg.

Disclaimer :

• Because of the continuous development programme the specifications may change without prior notice.
• The accessories shown in the picture are not a part of the standard system.
• Current and continuous development may make this publication / site lag actual equipment and accessory shipments. Consult your local distributor.